Storage and disk management problems

AXIS M1114

Troubleshooting

Storage disruption	A storage disruption alarm is sent if a storage device is unavailable, removed, full, locked or if other
	read or write problems occur. To identify the source of the problem, check the System Log under
	System Options > Support > Logs & Reports. Depending on the problem, it might be necessary to
	re-mount the storage device.
	For information on how to set up a storage disruption alarm, see Events on page 31.
Video cannot be recorded	Check that the SD card is not write protected (that is, read only).
SD card cannot be mounted	Reformat the SD card and then click Mount.

	NOTICE
	Formatting the card will remove all content, including all recordings, from the SD card.

Page 51

Image 51

Axis Communications M1114 user manual Storage and disk management problems, Storage disruption, Re-mount the storage device

Contents

Axis M1114 Intellectual Property Rights About this DocumentLegal Considerations Liability Learn More Support Axis M1114 Table of Contents Performance Considerations Control Button Connectors and ButtonsNetwork Connector Hardware Overview Network LED Indication LED IndicatorsPower LED Indication Status LED Indication Set the Root Password Access the ProductAccess from a Browser Access from the Internet Set Power Line Frequency Live ViewClick Create self-signed certificate Manual Trigger Go to Setup EventsControls on the Live View Axis Media Control viewer toolbar PTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video Stream Axis M1114 Back Focus Adjustment Set Up the ProductBasic Setup Focus Adjustment Image VideoVideo Stream Pixel Counter Click Save to apply the new settings Stream Profiles264 Image Appearance Camera SettingsExposure Settings View Area Go to Video Overlay Image OverlayOverlay Image Go to Video Video Stream and select the Image tab Go to Events Action Rules Use Overlay Text in an Action Rule Privacy Mask Browser Viewer Description Configure the Live ViewDefault Viewer for Browsers Viewer Settings User Defined Links Preset Positions PTZ Pan Tilt ZoomGuard Tour Controls Operator Same as administrator but with lower priorityAdvanced Control Queue Go to Detectors Camera Tampering DetectorsCamera Tampering Motion Detection Motion Detection Parameters Set Up Motion Detection Windows Axis M1114 Application Licenses Install ApplicationGo to Setup Applications Applications Axis M1114 Go to Events Action Rules and click Add Set Up Action RulesEvents Convert Event Types to Action Rules Actions Triggers Recipient Use with action Add RecipientsRecipient Types Go to Events Recipients and click Add Go to Events Schedules and click Add Set Up RecurrencesSet Up Email Recipients Create Schedules Axis M1114 Go to Recordings List RecordingsRecording List Continuous Recording Languages IP Address Filter System OptionsSecurity Users Ieee CertificatesGo to System Options Security Ieee Network Basic TCP/IP SettingsGo to Setup System Options Security Certificates Date & Time ARP/Ping IPv4 Address ConfigurationIPv6 Address Configuration Axis Internet Dynamic DNS Service Host Name Configuration Advanced TCP/IP SettingsDNS Configuration NTP Configuration FTP NAT traversal port mapping for IPv4 RTP/H.264 QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM UPnPTM Network Share MaintenanceStorage Bonjour Logs & Reports SupportSupport Overview System Overview File Upload Reset to Factory Default SettingsPlain Config Scripting Check the Firmware TroubleshootingUpgrade the Firmware Emergency Recovery Procedure Product is accessible locally but not externally Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product cannot be accessed from a browser Video Camera Settings Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video and image problems, general Reformat the SD card and then click Mount Storage and disk management problemsStorage disruption Re-mount the storage device Technical Specifications Power Function/group Specifications System ApplicationInstallation Maintenance General Casing Performance Considerations M2.5

AXIS M1114

Troubleshooting

Storage and disk management problems

Storage disruption

re-mount the storage device.

Reformat the SD card and then click Mount.