Hardware Overview, Network Connector | Axis Communications M1114E

AXIS M1114–E

Hardware Overview

Hardware Overview

1.Network LED

2.Status LED

3.Power LED

4.Iris connector

5.Network connector

6.Control button

7.Zoom puller

8.Focus puller

9.Screw holding CS ring

Connectors and Buttons

For technical specifications, see page 52.

Network Connector

RJ45 Ethernet connector with Power over Ethernet (PoE).

NOTICE

The product shall be connected using a shielded network cable (STP). All cables connecting the product to the network shall be intended for their specific use. Make sure that the network devices are installed in accordance with the manufacturer’s instructions. For information about regulatory requirements, see Electromagnetic Compatibility (EMC) on page 2 .

Control Button

For location of the control button, see Hardware Overview on page 6 .

The control button is used for:

•Resetting the product to factory default settings. See page 47.

•Connecting to an AXIS Video Hosting System service. See page 41. To connect, press and hold the button for about 3 seconds until the Status LED flashes green.

•Connecting to AXIS Internet Dynamic DNS Service. See page 41. To connect, press and hold the button for about 3 seconds.

6

Image 6

Axis Communications M1114E user manual Hardware Overview, Connectors and Buttons, Network Connector, Control Button

Contents

Axis M1114-E Liability About this DocumentLegal Considerations Intellectual Property Rights Support Learn More Table of Contents Axis M1114-E Performance Considerations Hardware Overview Connectors and ButtonsNetwork Connector Control Button Status LED Indication LED IndicatorsPower LED Indication Network LED Indication Access from the Internet Access the ProductAccess from a Browser Set the Root Password Set Power Line Frequency Live ViewClick Create self-signed certificate Axis Media Control viewer toolbar Go to Setup EventsControls on the Live View Manual Trigger PTZ Controls How to Stream H.264 Media StreamsAxis Media Control AMC Alternative Methods of Accessing the Video Stream QuickTimeTM. The following paths can be used Axis M1114-E Focus Adjustment Set Up the ProductBasic Setup Back Focus Adjustment Pixel Counter VideoVideo Stream Image Click Save to apply the new settings Stream Profiles264 View Area Camera SettingsExposure Settings Image Appearance Go to Video Video Stream and select the Image tab OverlayOverlay Image Go to Video Overlay Image Use Overlay Text in an Action Rule Go to Events Action Rules Privacy Mask Viewer Settings Configure the Live ViewDefault Viewer for Browsers Browser Viewer Description User Defined Links Preset Positions PTZ Pan Tilt ZoomGuard Tour Control Queue Operator Same as administrator but with lower priorityAdvanced Controls Motion Detection DetectorsCamera Tampering Go to Detectors Camera Tampering Set Up Motion Detection Windows Motion Detection Parameters Axis M1114-E Applications Install ApplicationGo to Setup Applications Application Licenses Axis M1114-E Convert Event Types to Action Rules Set Up Action RulesEvents Go to Events Action Rules and click Add Triggers Actions Go to Events Recipients and click Add Add RecipientsRecipient Types Recipient Use with action Create Schedules Set Up RecurrencesSet Up Email Recipients Go to Events Schedules and click Add Axis M1114-E Continuous Recording RecordingsRecording List Go to Recordings List Languages Users System OptionsSecurity IP Address Filter Ieee CertificatesGo to System Options Security Ieee Date & Time Basic TCP/IP SettingsGo to Setup System Options Security Certificates Network Axis Internet Dynamic DNS Service IPv4 Address ConfigurationIPv6 Address Configuration ARP/Ping NTP Configuration Advanced TCP/IP SettingsDNS Configuration Host Name Configuration NAT traversal port mapping for IPv4 FTP UPnPTM QoS Quality of ServiceUPnPTM can be disabled under System Options Network UPnPTM RTP/H.264 Bonjour MaintenanceStorage Network Share System Overview SupportSupport Overview Logs & Reports Scripting Reset to Factory Default SettingsPlain Config File Upload Emergency Recovery Procedure TroubleshootingUpgrade the Firmware Check the Firmware Product cannot be accessed from a browser Symptoms, Possible Causes and Remedial ActionsProblems setting the IP address Product is accessible locally but not externally Video and image problems, general Problems with streaming H.264Status and Network indicator LEDs are flashing red rapidly Video Camera Settings Re-mount the storage device Storage and disk management problemsStorage disruption Reformat the SD card and then click Mount Technical Specifications Maintenance General Casing Function/group Specifications System ApplicationInstallation Power Performance Considerations M2.5