Technical Data
Max. flow rate | 2.2 gpm |
Max. water pressure | 145 psi |
Recommended pressure: | 14.5 - 72 psi |
Max. hot water temperature: | 176° F |
Recommended hot water temp. | 120°F - 140°F* |
Hole size in mounting surface |
|
valve | 1 1/4" |
spout | 1 3/8" |
Maximum mounting surface depth | 1 5/8" |
Requires 1/2" supply lines and nuts.
Bidet faucet not for use on vertical spray bidets.
*Please know and follow all applicable local codes when setting the temperature on the water heater.
Installation
Remove the mounting ring with
Push the valve up through the hole in the mounting surface.
Install the stop ring on the valve. Install the mounting ring
Rest the valve on the mounting surface.
Tighten the mounting nut and the tensioning screws.
Installation Considerations
•For best results, Hansgrohe recom- mends that this unit be installed by a licensed, professional plumber.
•Please read over these instructions thoroughly before beginning instal- lation. Make sure that you have all tools and supplies needed to complete the installation.
•This faucet may be used with a con- tinuous flow water heater as long as the flow pressure is at least 14.5 psi.
