Cleaning Recommendation for Hansgrohe Products

Modern lavatory faucets, kitchen faucets, and showers consist of very different materials to comply with the needs of the market with regard to design and functionality. To avoid damage and returns, it is necessary to consider certain criteria when cleaning.

Cleaning Materials for Faucets and Showers

Acids are a necessary ingredient of cleaning materials for removing lime, however please pay attention to the follow- ing points when cleaning faucets and showers:

Only use cleaning materials which are explicitly intended for this type of application.

Never use cleaning materials which contain hydrochloric, formic, phosphoric, or acetic acid, as they cause considerable damage.

Never mix one cleaning material with another.

Never use cleaning materials or appliances with an abrasive effect, such as unsuitable cleaning powders, sponge pads, or micro fiber cloths.

Cleaning Instructions for Faucets and Showers

Please follow the cleaning material manufacturer’s instructions. In addition, pay attention to the following points:

Clean the faucets and showers as and when required

Use the amount of cleaning product and the amount of time recommended by the manufacturer. Do not leave the cleaner on the fixture longer than necessary.

Regular cleaning can prevent calcification.

When using spray cleaners, spray first onto a soft cloth or sponge. Never spray directly onto the faucet as drop- lets can enter openings and gaps and cause damage.

After cleaning, rinse thoroughly with clean water to remove any cleaner residue.

Important

Residues of liquid soaps, shampoos, and shower foams can also cause damage, so rinse with clean water after using. Please note: if the surface is already damaged, the effect of cleaning materials will cause further damage.

Components with damaged surfaces must be replaced or injury could result. Damage caused by improper treatment is not covered under the warranty.

Limited Lifetime Consumer Warranty

This product has been manufactured and tested to the highest quality standards by Hansgrohe, Inc. (“Hansgrohe”). This warranty is limited to Hansgrohe products which are purchased by a consumer in the United States after March 1, 1996, and installed in either the United States or Canada.

WHO IS COVERED BY THE WARRANTY

This warranty extends to the original consumer purchaser only. This warranty is non-transferable.

WHAT IS COVERED BY THE WARRANTY

This warranty covers only your Hansgrohe manufactured product. Hansgrohe warrants this product against defects in material or workmanship as follows: Hansgrohe will repair at no charge for parts only or, at its option, replace any product or part of the product that proves defective because of improper workmanship and/or material, under normal installation, use, service and maintenance. If Hansgrohe is unable to provide a replacement and repair is not practical or cannot be timely made, Hansgrohe may elect to refund the purchase price in exchange for the return of the product.

Page 6
Image 6
Axor 28496xx1 installation instructions Cleaning Recommendation for Hansgrohe Products, Limited Lifetime Consumer Warranty

28496xx1 specifications

The Axor 28496xx1 is a prominent model in the realm of commercial vehicles, renowned for its robust performance, fuel efficiency, and advanced technology. Tailored to meet the demands of heavy-duty transportation, this vehicle stands out for its exceptional engineering and reliability.

One of the main features of the Axor 28496xx1 is its powerful engine. Equipped with a 6-cylinder inline engine boasting a displacement capacity that enhances torque and power output, this model delivers outstanding performance even under heavy loads. The high torque at lower RPMs facilitates smooth acceleration and improved driving dynamics, making it well-suited for both urban and long-distance journeys.

The Axor 28496xx1 also prioritizes fuel efficiency, a critical aspect for commercial operators. Through innovative engineering, the vehicle’s design minimizes aerodynamic drag, while its efficient engine management system optimizes fuel consumption. This means operators can enjoy reduced fuel costs, making it an economically viable option for businesses.

In terms of safety, the Axor 28496xx1 is equipped with advanced features such as ABS (Anti-lock Braking System) and EBD (Electronic Brakeforce Distribution). These technologies enhance brake performance, ensuring stability and control during emergency situations. Additional safety options include adaptive cruise control and lane-keeping assist, allowing drivers to remain focused and alert on the road.

The cab design of the Axor 28496xx1 is another highlight, providing a comfortable and ergonomic environment for the driver. The spacious interior is equipped with modern amenities, such as an advanced infotainment system, ensuring that long hours on the road are as pleasant as possible. The user-friendly dashboard layout enhances functionality, allowing drivers to focus on the road ahead.

Moreover, maintenance of the Axor 28496xx1 is simplified due to well-thought-out design considerations. Service points are accessible, and a variety of diagnostic tools are integrated to help fleet managers keep track of vehicle health, thus minimizing downtime.

In conclusion, the Axor 28496xx1 combines robust performance, high efficiency, advanced safety features, and driver comfort. It represents a solid choice for businesses looking to enhance their transport capabilities while keeping operational costs in check. This vehicle stands testament to the advances in commercial vehicle technology, delivering top-notch performance and reliability.