Uno
38020XX1 | 38025XX1 | 38210XX1 |
Technical Information
Recommended water pressure | 14.7 - 72.5 psi |
Max. water pressure | 145 psi |
Recommended hot water temp. | 120° - 140° F* |
Max. hot water temp | 176° F* |
Hole size in mounting surface | 1 3/8" |
Max. mounting surface depth | 1 3/8" |
Flow rate – lavatory | 1.5 gpm |
Flow rate – bidet | 2.2 gpm |
Cartridge with high temperature limit stop 3/8" supply hoses
*Please know and follow all applicable local plumbing codes when setting the temperature on the water heater.
Installation Considerations
•For best results, Hansgrohe recommends that this unit be installed by a licensed, profes- sional plumber.
•Please read over these instruc- tions thoroughly before begin- ning installation. Make sure that you have all tools and supplies needed to complete the instal- lation.