Axxess Interface manual Operation, Installing the ABTI-GM1 with Parrot Handsfree CAR Kits

ABTI-GM1

8)Connect the white 8-pin plug on the IHF-1000 cable to the power cable, and connect the other end of the power cable to the ABTI-GM1 module.

9)Install the IHF-1000 keypad on the dashboard of the vehicle, and route the wire to the IHF- 1000 harness. Attach the keypad connector to the harness.

				NG
			ISTI
		UG	EX	g
UNPL			p
		in	lu
	p
2
1

FROM CAR

FROM CAR

NG

STI

UG

EXI

lug

L

UNP

p

in

p

4

2

G

TIN

XIS

GE

g

U

-PL

lu

RE

p

in

p

2

1

FROM CAR

FROM CAR

NG

XISTI

GE

LU

lug

-P

RE

p

in

p

24

IHF-1000 keypad

				ss
			ne
			har
		e
		cabl
	sII
as
Cl

ABTI-GM1

White 8 pin

plug

10)Install the IHF-1000 microphone in an appropriate location (see IHF-1000 instructions), route the wire to the IHF-1000 harness, and attach the microphone connector to the harness.

11)Secure all components, and reinstall the radio.

12)Reconnect the vehicle battery.

OPERATION

Refer to the Motorola IHF1000 manual for operation. Adjust the volume of the handsfree kit by turning the volume knob of the radio. Audio from any source will be muted when a call comes in or a call is made.

INSTALLING THE ABTI-GM1 WITH PARROT HANDSFREE CAR KITS

*Note: The ISO to 8 way connector harness will be used in this application.

*Note: The 8 way to 8 way connector harness will NOT be used in this application.

Compatible Parrot kits: CK3000, CK3000 Evolution, CK3100, CK3300, CK3500, 3200LS, 3400LS-GPS, MK6000, MK6100

(Installation will be the same as the Motorola Handsfree kit steps 1-7)

8) Plug the 8 way side of the ISO to 8 way harness into the 8 way connector on the ABTI-GM1.

5