Ayre Acoustics V-5x owner manual Trigger Input

A y r e

V-5x

In the green “Standby” mode the output stage is turned off, while the input circuitry remains powered. This allows the unit to warm up quickly for optimal sonic performance, while reducing the power consumption from 120 watts to 10 watts.

Trigger Input

Use a 1/8" mini-phone plug A trigger input is provided on the rear panel of the

with a positive voltage of V-5x to allow for remote switching between the

between +5 and +12 VDC green “Standby” and blue “Operate” modes. The

at the tip to operate the trigger two trigger input jacks are wired in parallel. Either

input. jack can act as an input or a pass-through output to allow for “daisy-chaining” of multiple devices.

The unit is shipped from the factory in the level-sensitive mode, which is compatible with most equipment. During level-sensitive operation, applying a voltage to the trigger input will force the amplifier to the “Operate” mode. In this state, the front panel switch is inoperative. When the applied voltage drops to zero, the unit reverts to “Standby”

7