Rail Fuses

Indicator LEDs on the rear of Internal fuses on the power supply rails of each

the unit will glow red when channel protect the loudspeakers from excessive

one of the fuses fails. Please current, as well as the amplifier from short-circuits.

refer fuse replacement to a There are two rail fuses per channel. If either one of

qualified service technician. the rail fuses fail, that channel will fail to operate.

The front panel LED will typically continue to glow blue if both fuses in one channel fail, while it change to red if only one of the fuses fails. Therefore the front panel LED is not a reliable indicator of blown rail fuses. Instead refer to the fuse status LEDs on the rear panel of the amplifier.

Do not remove the amplifier cover. Hazardous voltages may exist inside the unit.

Use of rail fuses other than a 5 x 20 mm fast-acting 10 ampere unit may damage the unit and void the warranty.

AC Line Voltage

If the AC line voltage drops below 80% of normal (brown-out), the unit will revert to the red “Warm-Up” mode with the outputs muted. After the voltage returns to normal, the initial warm-up cycle will begin again and the unit will then revert to the green “Standby” mode. Press the front panel button to return the unit to the blue “Operate” mode.

11

Page 13
Image 13
Ayre Acoustics V-5XE owner manual Rail Fuses, AC Line Voltage

V-5XE specifications

The Ayre Acoustics V-5XE is an impressive power amplifier designed for audiophiles seeking superior sound quality and performance. This amplifier is a perfect embodiment of Ayre's commitment to innovation, refinement, and attention to detail. The V-5XE is a testament to their philosophy of "the music is the most important thing."

One of the primary features of the V-5XE is its powerful amplification. With a robust 160 watts per channel into 8 ohms, and a remarkable 320 watts into 4 ohms, this amplifier is capable of driving a wide range of loudspeakers with ease. The dynamic headroom provided by the V-5XE ensures that even the most demanding musical passages are rendered effortlessly, delivering a sound that is both impactful and nuanced.

The V-5XE employs Ayre's proprietary Zero Global Feedback design, a hallmark of their engineering approach that seeks to minimize distortion and improve sound purity. By avoiding global feedback, the amplifier allows for a more natural sound reproduction that is faithful to the original signal. This results in a musicality that engages the listener, allowing them to connect more deeply with the music.

In addition to the Zero Global Feedback design, the V-5XE features Ayre's unique "fully balanced" topology. This design eliminates potential noise and interference, resulting in a quieter, more detailed soundstage. It also allows for greater flexibility in system integration, making the V-5XE compatible with a variety of source components and loudspeakers.

Thermal management is another critical aspect of the V-5XE's design. The amplifier utilizes a unique heat-sink system that ensures optimal cooling during operation, preventing thermal distortion and contributing to longevity. This feature allows the V-5XE to maintain consistent performance, even during extended listening sessions.

The exterior of the V-5XE reflects Ayre's commitment to quality, featuring a sleek and elegant design that enhances both aesthetics and functionality. The front panel is both user-friendly and visually appealing, with easy-to-read indicators and a minimalist design that complements any audio setup.

In summary, the Ayre Acoustics V-5XE power amplifier is a remarkable component that combines advanced technology, superior musicality, and elegant design. Its powerful amplification, innovative engineering, and meticulous attention to detail make it a standout choice for those who demand the highest level of performance from their audio systems. Whether for casual listening or critical listening sessions, the V-5XE delivers an exceptional auditory experience that is undeniably captivating.