Azden SGMPDII Power, MIC Output, Shoe-Mount Holder, Specifications, Electret Condenser Microphone

Thank you for purchasing the Azden SGM-PD II microphone. Designed for video and audio pro- fessionals, the SGM-PD II is a uni-directional shotgun microphone with a wide frequency response and low noise levels.

Power:

The SGM-PD II must be powered by Phantom- Power. To power the unit, connect an XLR cable to the microphone from a voltage source that supplies between 11 and 52VDC. (see wiring diagram below)

MIC Output:

The SGM-PD II has a balanced 3-pin XLR connector.

Shoe-Mount Holder:

The SGM-PD II is supplied with a camera- mountable mic holder. Snap the near portion of the microphone into the holder. To secure the holder, slide the holder into the camera shoe and tighten the thumbwheel by turning it clockwise.

Shield

Positive (Hot)

Negative (Cold)

SPECIFICATIONS:

Electret Condenser Microphone

Frequency Response	80-18,000Hz
Sensitivity	–33dB at 1kHz (0dB=1V/Pa)
Impedance	130 Ohms at 1KHz
MAX SPL (Input Level)	120dB SPL (1kHz at 1% T.H.D)
Signal-To-Noise Ratio	70dB. (1kHz at 1Pa)
Power (Phantom-Power)	11 ∼ 52VDC
Current	∼2.4mA
Weight	110g
	3.88oz
Dimensions	∅ 21mm x 150mm
	∅ 0.827 x 5.9 inches
Connector	3-PIN XLR
Supplied Accessories	Shoe-Mount Holder,
	Wind Screen, Pouch

Frequency Response Super-Cardioid Polar Pattern

Due to constant improvements, specifications are subject to change without notice.