Aztech Systems HL108E Connecting the Device

Easy Start Guide
Internet Properties
To set the Internet Properties:
1. Select Start > Run. This opens the Run dialog box.
2. Enter control inetcpl.cpl and then click OK. This opens the Internet Properties
dialog box.
3. Click Connections tab.
4. In the Dial-up and Virtual Private Network s ettings pane, select Never dial a
connection.
5. Click OK to close the Internet Properties dialog box.
Connecting the Device
HomePlug AV does not require the installation of a device driver. It is a plug-and-play
device that can be used right after connecting the network cables and plugging it into a
power outlet.
To connect HomePlug AV with your computer:
1. Insert one end of the network cable into your computer’s Ethernet port.
2. Insert the other end of the network cable into HomePlug AV.
3. Plug HomePlug AV into a power outlet.
Page 10 of 20