QUICK START GUIDE
B&B ELECTRONICS
|
| EIR205 | |
|
| © 2008 by B&B Electronics. All rights reserved. | |
|
|
|
|
Attach Fiber Optic Cable |
| Mechanical Diagram |
|
(if equipped) |
|
|
|
|
|
| |
|
|
|
|
Warning: Work Safe – Fiber Optic equipped models are Class I Laser/LED devices. To avoid causing serious damage to your eyes, DO NOT STARE DIRECTLY INTO THE LIGHT.
1.Slider Guide
2.Slider Ridges
3.Slider
1.Ensure your fiber optic cable is terminated with the correct connector type. EIR205 switches use SC or ST connectors.
2.Fiber optic type for each port is located on the product’s side label. When connecting the cable to the switch, be sure to line up the slider guide on the cable and switch connectors.
3.Connect the fiber optic transmitter to the downstream device’s receiver and
Mode and Distance | Type | Wavelength |
62.5/125 µm | 1310 nm | |
9/125 µm | 1310 nm | |
9/125 µm | 1310 nm | |
9/125 µm | 1550 nm |
| Output Power | RCVR Sensitivity |
≤ | ||
≤ | ||
≤ | ||
≤ |
Installation Complete
1. When the network cables are attached and power is applied, installation is complete.
2.The switch will automatically discover network devices, populate its MAC address table, and pass traffic to the appropriate ports.
International Headquarters: 707 Dayton Road PO Box 1040 Ottawa, IL 61350 USA
European Headquarters: Westlink Commercial Park Oranmore Co. Galway Ireland +353 91 792444 Fax +353 91 792445
