Using the Web Configuration and Management Interface
Figure 7. Network, IP Settings Page
IP Settings
The IP Settings section allows you to select between dynamic or static IP addressing. The ES1A’s default setting is Obtain an IP address automatically using DHCP, or dynamic IP addressing.
When the ES1A is first connected it will try to obtain an IP address automatically. If it fails, it will assign an IP address to itself using the Automatic Private IP Addressing (APIPA) protocol. You can
If Use the following IP address: is selected, you are choosing static IP addressing. When this option is selected the IP Address, Subnet Mask and Default Gateway text boxes become available. You must determine the appropriate parameters and enter them yourself. (If you do not know what to enter ask your network administrator for assistance.)
To implement any changes in this section, click Apply. A page will appear asking you to Reboot the ES1A so that the changes can take effect.
Network Services Settings
The Network Services Settings section allows you to enable or disable several common network services and configure their associated ports. Typically you will not have to change these settings.
Advanced Network Settings
The Advanced Network Settings section allows you to
14 | Manual Documentation Number: ES1A |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353
