Using the Web Configuration and Management Interface
Configuring Alarms and Notification
The ES1A can be configured to generate alarms and send notification emails based on the occurrence of specific events. Events include the states of some
Note: In the ES1A GPIO lines are permanently configured as
Alarm Notification Settings
The Alarm Notification Settings page provides a checkbox to enable alarm notifications. Text boxes are provided to enter the IP address of your SMTP mail server and the email address that will be placed in the From field of the email.
Alarm Conditions
The Alarm Conditions page is a tabular listing of 32 alarms that can be configured. Table headings include Enable (a checkbox), Alarm name/number, Type of alarm, Trigger conditions, SNMP Trap, Send to address and Email Subject line.
Clicking on the Alarm name opens an Alarm Configuration page for that specific alarm. The page contains two sections: Alarm Conditions and Alarm Destinations.
Alarm Conditions allows you to select
GPIO is not supported in the ES1A but it is possible to use the Send alarms based on GPIO pin states feature to generate alarms based on the condition of some RS- 232 hardware handshake lines. For assistance in implementing this feature call B&B Electronics Technical Support or email
To Send alarms based on serial data pattern matching, select that option and type a character string into the text box provided.
22 | Manual Documentation Number: ES1A |
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph
B&B Electronics Ltd – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353
