B&B Electronics PIOC manual

NOTE 1: The addresses marked with an "*" are the addresses normally associated with LPT1 and LPT2. 378 (and sometimes 3BCh) is used as LPT1 and 278h is usually used with LPT2.

NOTE 2: The last two bits (A0 and A1), marked with an "X" on SW1, are not used.

NOTE 3: A "1" indicates that the switch is ON and a "0" indicates that the switch is OFF.

Documentation Number PIOC2595 Manual 15

B&B Electronics -- PO Box 1040 -- Ottawa, IL 61350

PH (815) 433-5100 -- FAX (815) 433-5105