Software
Software used with B&B Electronics’ SDAXX, SPDA and ADIO12 modules to control the TCDA module is included with the TCDA. This software is very similar to the software included with the SDAXX, SPDA and ADIO12 module but with some minor modifications.
To install the software in your PC:
1.Place the disk in drive A.
2.Type A: and press the <ENTER> key.
3.Type INSTALL and press the <ENTER> key.
4.Follow the instructions given by the program.
Specifications
Size: | 4.8” x 2.2” x 0.9” |
Channels: | 2 |
Resolution: | 20mV/° C |
Input Voltage Offset: | 150∝ V |
Input Voltage Offset Drift: | 1.5∝ V/° C |
Temperature Measurement Range: | |
TCDA Operating Temperature: | 00C to 70° C |
Maximum Temperature Error: | +/- 3° C |
Power Requirements: | 12 to 16VDC @ 10mA |
Output Voltage Range: | 0 to 5VDC |
The TCDA module will operate in an environment between 0° C and 70° C but can measure temperatures between
2Documentation Number TCDA0997 Manual
B&B Electronics
PH (815)