10NW64 Woofer
600 W continuous program power capacity
64 mm (2.5 in) copper voice coil
50 – 2500 Hz response
96 dB sensitivity Neodymium magnet allows a very light yet powerful motor assembly Shorting copper cap for extended HF response Ventilated voice coil gap for reduced power compression
LF Drivers LF Nd Drivers Coaxials HF Drivers Horns
Specification
Nominal Diameter | 250 (10) mm (in) |
Nominal Impedance (1) | 8 Ohm |
Minimum Impedence | 6.5 Ohm |
Nominal Power Handling (2) | 300 W |
Continuous Power Handling (3) | 600 W |
Sensitivity (1W/1m) (4) | 96 dB |
Frequency Range | 50 - 2500 Hz |
Voice Coil Diameter | 64 (2.5) mm (in) |
Winding Material | Copper |
Former Material | Glass Fibre |
Winding Depth | 16 (5/8) mm (in) |
Magnetic Gap Depth | 8 (5/16) mm (in) |
Flux Density | 1.25 T |
Thiele & Small Parameters
Fs | 50 Hz |
Re | 5.2 Ohm |
Qes | 0.27 |
Qms | 4.5 |
Qts | 0.26 |
Vas | 27.5 (0.95) dm3 (ft3) |
Sd | 320 (50) cm2 (in2) |
Eta Zero | 1.3 % |
Xmax | +/- 8 mm |
Xvar | +/- 10 mm |
Mms | 47 g |
Bl | 17.5 Txm |
Le | 0.47 mH |
| |
Mounting and Shipping Info | |
|
|
Overall Diameter | 261 mm (10.3 in) |
Bolt Circle Diameter | 245 mm (9.6 in) |
Baffle Cutout Diameter | 230 mm (8.8 in) |
Depth | 113 mm (4.4 in) |
Flange and Gasket Thickness | 13 mm (0.5 in) |
Net Weight | 2.9 kg (6.4 lb) |
Shipping Weight | 3.5 kg (7.7 lb) |
Shipping Box | 330x330x160 mm |
| (13x13x6.3 in) |
1For different impedances, please ask.
22 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance.
3Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms or 2.0V for 4 ohms Nominal Impedance
