10PLB76 Woofer
800 W continuous program power capacity
76 mm (3 in) aluminium voice coil
50 – 2500 Hz response
98 dB sensitivity Aluminium demodulating ring allows a very low distortion figure
LF Drivers LF Nd Drivers Coaxials HF Drivers Horns
Specification
Nominal Diameter | 250 (10) mm (in) |
Nominal Impedance (1) | 8 Ohm |
Minimum Impedence | 6 Ohm |
Nominal Power Handling (2) | 400 W |
Continuous Power Handling (3) | 800 W |
Sensitivity (1W/1m) (4) | 98 dB |
Frequency Range | 50 - 2500 Hz |
Voice Coil Diameter | 76 (3) mm (in) |
Winding Material | Aluminium |
Former Material | Glass Fibre |
Winding Depth | 20 (0.8) mm (in) |
Magnetic Gap Depth | 8.5 (0.33) mm (in) |
Flux Density | 1.1 T |
Thiele & Small Parameters
Fs | 52 Hz |
Re | 4.8 Ohm |
Qes | 0.20 |
Qms | 3.4 |
Qts | 0.19 |
Vas | 31 (1.1) dm3 (ft3) |
Sd | 320 (49.1) cm2 (in2) |
Eta Zero | 2.2 % |
Xmax | +/- 6 mm |
Xvar | +/- 7 mm |
Mms | 43 g |
Bl | 18.4 Txm |
Le | 0.32 mH |
| |
Mounting and Shipping Info | |
|
|
Overall Diameter | 262 mm (10.3 in) |
Bolt Circle Diameter | 245 mm (9.6 in) |
Baffle Cutout Diameter | 230 mm (8.8 in) |
Depth | 124 mm (4.9 in) |
Flange and Gasket Thickness | 14 mm (0.55 in) |
Net Weight | 7.3 kg (16.1 lb) |
Shipping Weight | 7.9 kg (17.4 lb) |
Shipping Box | 330x330x160 mm |
| (13x13x6.3 in) |
1For different impedances, please ask.
22 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance.
3Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
