Crossover
Model XO-2
Filter Type Two way
Nominal Impedance 8 Ohm
Crossover Frequency 1.8 kHz
Slope 6 dB/oct. (Low)
12 db/oct. with eq. (High)
Overall Dimensions 142x107 mm (5.6x4.2 in)
Weight 0.4 kg (0.9 lb)
1Included by –6 dB down points, averaged from 1 kHz to 8 kHz with B&C
XO-2 crossover filter.
2Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
32 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance. Loudspeaker in free air.
4Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
5Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.
62 hours test made with continuous pink noise signal (6 dB crest factor)
within the specified range . Power calculated on rated minimum
impedance. Loudspeaker in free air.
7Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
812 dB/oct. or higher slope high-pass filter.