DCM36 MF Drivers
160 W continuous program power capacity 1.4” horn throat diameter 400 – 11000 Hz response 108.5 dB sensitivity
Neodymium magnet assembly
LF Drivers LF Nd Drivers Coaxials HF Drivers Horns
Specifications
Throat Diameter (1) | 36 mm (1.4 in) |
Nominal Impedance | 8 ohm |
Minimum Impedance | 8 ohm |
Nominal Power Handling (2) | 80 W |
Continuous Power Handling (3) | 160 W |
Sensitivity (1W/1m) (4) | 108.5 dB |
Frequency Range | 0.4 |
Recommended Crossover (5) | 400 Hz |
Voice Coil Diameter | 51 mm (2 in) |
Winding Material | Aluminium |
Inductance | 0.18 mH |
Diaphragm Material | Composite |
Flux Density | 2.1 T |
| |
Mounting and Shipping Info | |
|
|
Four M6 holes 90° on 102 mm |
|
(4 in) diameter |
|
Overall Diameter | 152 mm (6 in) |
Depth | 108 mm (4.25 in) |
Net Weight | 3.1 kg (6.8 lb) |
Shipping Weight | 3.3 kg (7 lb) |
Shipping Box | 170x170x140 mm |
| (6.7x6.7x5.5 in) |
1Driver mounted on 320 Hz exponential horn
22 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance.
3Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. 512 dB/oct. or higher slope
