DE12 HF Drivers
50 W continuous program power capacity 1” horn throat diameter 36 mm (1.4 in) aluminium voice coil Mylar diaphragm
1500 – 18000 Hz response
106 dB sensitivity
LF Drivers LF Nd Drivers Coaxials HF Drivers Horns
Specifications
Throat Diameter (1) | 25 mm (1 in) | |
Nominal Impedance (2) |
| 8 ohm |
Minimum Impedance | 7.8 ohm | |
Nominal Power Handling (3) |
| 25 W |
Continuous Power Handling (4) |
| 50 W |
Sensitivity (1W/1m) (5) |
| 106 dB |
Frequency Range | 1.5 | |
Recommended Crossover (6) |
| 2.2 kHz |
Voice Coil Diameter | 36 mm (1.4 in) | |
Winding Material | Aluminium | |
Inductance | 0.14 mH | |
Diaphragm Material |
| Mylar |
Flux Density |
| 1.45 T |
|
| |
Mounting and Shipping Info |
| |
|
|
|
Two M5 holes 180° on 76 mm (3 |
|
|
in) diameter |
|
|
Overall Diameter | 90 mm (3.5 in) | |
Depth | 49 mm (2 in) | |
Net Weight (1 unit) | 1 kg | (2.2 lb) |
Shipping Weight (8 units) | 8.9 kg | (20 lb) |
Shipping Box (8 units) | 220x220x150 mm | |
| (8.7x8.7x5.9 in) | |
1Driver mounted on B&C ME45 horn
2Also available in 16 ohms, data upon request
32 hours test made with continuous pink noise signal (6 dB crest factor) within the specified range . Power calculated on rated minimum impedance.
4Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
5Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. 612 dB/oct. or higher slope
