Page 7 13004 rev 0004
)LJXUH'
Outputs
Five wa
y
bindin
g
posts are provided. One pair for each channel. The
y
are desi
g
ned to
accept a banana-t
y
pe plu
g
or spade lu
g
connector (shown below) and are color coded
for eas
y
identification. The red (+) post should alwa
y
s be connected to the speakers (+)
jack. The black (-) post should alwa
y
s be connected to the speakers (-) jack.
Spade connector Banana
j
ack
Here is a t
y
pical amplifier setup:
Inputs
Unbalanced - RCA t
y
pe connectors accept line input from the preamplifier’s
unbalanced output connectors. There are two input connectors, one for
each channel, that ma
y
be used to connect the amplifier to the
preamplifier.
RCA cable connector -
Operation - For unbalanced operation, ensure the balanced switch between the
balanced inputs on the rear of the amplifier is in the ‘off’ (out) position. If
the amplifier does not have balanced inputs then it is alwa
y
s in
unbalanced mode.