B&K series II Rear Panel View, REAR PANEL DESCRIPTION

Rear Panel View

1. AC fuse holder 4. Amplifier control muting input/output

2. AC Input receptacle 5. Level controls

3. Speaker outputs 6. Inputs

7. Speaker fuses

1. AC fuse holder - Holds the AC Line fuse. This fuse is a 15 Amp / 250 Volt Slow Blow

fuse. Replace only with the same type and value fuse.

2. AC Input receptacle - For attaching the supplied AC power cord to the amplifier.

3. Speaker outputs - For connecting the speakers to the amplifier. Explained further on

page 6.

4. Amplifier control muting input/output -

To provide remote switching of the mute

on/off feature of the amplifier. Explained further on pages (8 - 9).

5. Level controls - For adjusting the input level of each channel into the amplifier. There

are seven level controls on the back of the amplifier. One level control for each channel.

6. Inputs - For connecting signal patch cables (interconnects) from the preamplifier to the

amplifier to pass a signal. Pages (5 - 6).

7. Speaker Fuses - Protection against amplifier damage in the case of shorted speaker

wires. Replace fuse with the same value 6 AMP T-Lag only! VERY IMPORTANT!

Page 4

P/N 13009 Rev.0102