Baby Trend 8866 manual Recline Seat, To USE Safety Belt, To Release Safety Belt

To adjust the position, squeeze the tray release handle located underneath the tray and reposition the tray to the desired position. (see Fig.5). Release tray release handle. Check that the tray is securely locked in it’s new position. The dishwasher safe food tray snaps onto the high chair tray and is held in place by tabs on either side of the tray. When installing the food tray make sure that it snaps into place to prevent the child from removing the food tray. To remove the food tray, carefully lift outward on the tabs on each side.

RECLINE SEAT

Squeeze recline lever on back of the seat and adjust to the preferred recline or upright position. (see Fig.6)

WARNING: It is recommended that only children capable of sitting up- right unassisted use the high chair in the upright position.

WARNING: Prevent serious in- jury or death from falls or sliding out. Al- ways secure child in the restraint system, either in the reclining, semi-reclining or upright position.

TO USE SAFETY BELT

The tray is not designed to hold the child in the chair. Al- ways keep child in view while in high chair. Never leave child unattended.

Step 1.

Place your child’s arms through the loops formed by the shoulder and waist straps. Place the crotch strap between your child’s legs. Insert the harness buckles into the center buckle to fasten.

Step 2.

Adjust shoulder and waist straps for your child’s comfort and safety by sliding buckles in either direction. Safety straps are to fit snug around your child. (see Fig. 7)

TO RELEASE SAFETY BELT

Step 1.

Squeeze sides of buckles to release. (see Fig. 8)

Squeeze up to release

4 positions

Fig. 6

Fig. 7	Adjust for a
	snug fit

Fig. 8

6 positions

Squeeze up to release

Fig. 9 4