SEATBACK POSITIONING

The seat has a multiple position recline that is controlled by a cord and spring loaded adjuster behind the seat. To recline the seat, pull back on the adjuster while holding the 2 cords. See figure 13. To place the seat back in a more upright position, grab the adjuster with one hand and pull the loop to the desired position with the

other hand. See figure 14. The cord will lock automatically.

The upright position should be used only for a child that is at least 6 months old. Always re-adjust the safety harness, including the shoulder belts, when repositioning the seatback.

BRAKES

WARNING: Always set brakes when the stroller is not being pushed so that the stroller will not roll away. Never leave stroller unattended on a hill or incline as the stroller may slide down the hill.

To engage brakes, apply light downward pressure to the brake lever located on each rear wheel. The stroller may require slight forward or rearward movement in order to line up the teeth on the brake with each wheel brake cluster. See figure 15. Check that the stroller will not move and that both brakes are properly applied. To release, gently lift up on the brake lever.

CANOPY

The canopy features a ratchet system that allows the canopy to be moved forward or back to block the sun or wind. To adjust the canopyʼs position, push forward or backward on the canopy until the canopy is in the desired position. See figure 16.

Figure 13.

Figure 14.

Figure 15.

Figure 16.

6

Page 6
Image 6
Baby Trend 9133, 9199, 9139, 9121, 9100 manual Seatback Positioning, Brakes, Canopy