Use
If the screwdriver is turned in the direction of tightening, you hear a click when the correct torque has been reached. When undoing screws, there is no torque limit.
Inserting blades
Blades with a 1/4" male hexagon drive can be inserted. Blade profiles such as slotted, PHILLIPS, POZIDRIV and hexagon can be selected.
Application of the sliding T-handle
In order to apply the required torque with less effort, the
When the rod has been pushed through the insert, the screwdriver is secured to the
Setting the torque
The torque can be set at the end of the handle using a 5 mm hexagon key. Torque is increased by turning clockwise and decreased by turning
Adjustments can be made easily and accurately with the torque calibration rig as illustrated opposite.
Accuracy: ± 6%
Nm
1
2
5 mm
+ Nm
– Nm
Nm
– +
✔
+
Product code | EAN code | Nm |
| mm |
|
|
| 731415+ |
|
|
|
| |
1848651 | 0,5 – 15 1/4" | 1/4" 5 mm | 32 x 150 | 335 | 1 |
www.bahco.com
MS7058ENG
