ProfCut+ base assortment, ProfCut base assortment | Bahco specification

Selection Table

There are a few things to consider when selecting the right saw for the job. The following steps and the table below will help you to choose. Then complete the selection with other saw features you prefer.

Contact us if you need more information!

Superior

Step 1. Select saw model: Superior, ProfCut or PrizeCut.

Step 2. Select saw according to column 1 – Type of saw/material.

Step 3. Select saw according to application – se column 5 and column 6 (Length).

- Precision work:	Use fine cut saws with small teeth from 9/10 to 15/16 teeth/points per inch.
	The length of the saw makes little difference.
- General work:	Use medium cut saws with medium size teeth from 7/8 to 9/10 teeth/points per inch.
	The length should be 18-22 inches for vigorous, thrusting strokes.
- Rough work:	Use coarse cut saws with large teeth with 7/8 teeth/points per inch.
	The length should be 22-26 inches for long, vigorous strokes.

GENERAL				BLADE					HANDLE
Type of	Art. code	EAN-	Pack	Application	Length	Toothing/TPI	Low friction	Thickness	Type
saw/material		code	Qty		in/mm		coating	of blade
COARSE	2700-24-XT7-HP	7311518191665	4	Timber, wet wood and tanalised 24/600		XT/7	Yes	1.03 mm	Ergo, 2 component
COARSE	2700-22-XT7-HP	7311518191672	4	Timber, wet wood and tanalised 22/550		XT/7	Yes	1.03 mm	Ergo, 2 component
MEDIUM	2600-22-XT-HP	7311518160777	4	Medium cutting	22/550	XT/9	Yes	1.03 mm	Ergo, 2 component
MEDIUM	2600-19-XT-HP	7311518160760	4	Medium cutting	19/475	XT/9	Yes	1.03 mm	Ergo, 2 component
Toolbox saw
FINE	2600-16-XT11-HP	7311518239527	4	Toolbox	16/400	XT/11	Yes	1.03 mm	Ergo, 2 component
Laminate saw
LAMINATOR	SUP-20-LAM	7311518258351	4	Laminate and wooden floors	20/500	XT/11	Yes	0.93 mm	Ergo, 2 component
Small saws
TENON	3180-14-XT11-HP	7311518181390	4	Tenon saw	14/360	XT/11	Yes	0.75 mm	Ergo, 2 component
VENEER	3240-14-XT11-HP	7311518243005	4	Veneer saw	14/360	XT/11	Yes	0.75 mm	Ergo, 2 component
COMPASS	3150-12-XT9-HP	7311518181406	4	Compass saw	12/300	XT/9	Yes	1.03 mm	Ergo, 2 component
ProfCut
GENERAL				BLADE					HANDLE
Type of	Art. code	EAN-	Pack	Application	Length	Toothing/TPI	Low friction	Thickness	Type
saw/material		code	Qty		in/mm		coating	of blade
ProfCut+ base assortment
MEDIUM	PCP-22-GT7	7311518263331	4	Medium cutting	22/550	GT/7	Yes	0.83 mm	2 component
MEDIUM	PCP-19-GT7	7311518263317	4	Medium cutting	19/475	GT/7	Yes	0.83 mm	2 component
FINE	PCP-22-GT9	7311518263348	4	Fine cutting	22/550	GT/9	Yes	0.83 mm	2 component
FINE	PCP-19-GT9	7311518263324	4	Fine cutting	19/475	GT/9	Yes	0.83 mm	2 component
ProfCut base assortment
MEDIUM	PC-22-GT7	7311518263393	4	Medium cutting	22/550	GT/7	No	0.83 mm	2 component
MEDIUM	PC-19-GT7	7311518263362	4	Medium cutting	19/475	GT/7	No	0.83 mm	2 component
FINE	PC-22-GT9	7311518263409	4	Fine cutting	22/550	GT/9	No	0.83 mm	2 component
FINE	PC-19-GT9	7311518263379	4	Fine cutting	19/475	GT/9	No	0.83 mm	2 component
Toolbox saw
FINE	PC-15-TBX	7311518263423	4	Fine cutting/Toolbox	15/380	GT/11	No	0.75 mm	2 component
Small saws
TENON	PC-12-TEN	7311518263447	4	Tenon saw	12/300	UT/11	No	0.75 mm	2 component
VENEER	PC-12-VEN	7311518263430	4	Veneer saw	12/300	UT/11	No	0.75 mm	2 component
COMPASS	PC-12-COM	7311518263454	4	Compass saw	12/300	XT/9	No	1.03 mm	2 component
Fileable saws
MEDIUM	PC-16-FILE-U7	7311518263461	4	Medium cutting/Fileable	16/400	UT/7 Fileable	No	0.83 mm	2 component
MEDIUM	PC-19-FILE-U7	7311518263478	4	Medium cutting/Fileable	19/475	UT/7 Fileable	No	0.83 mm	2 component
MEDIUM	PC-22-FILE-U7	7311518263485	4	Medium cutting/Fileable	22/550	UT/7 Fileable	No	0.83 mm	2 component
MEDIUM	PC-24-FILE-U7	7311518263492	4	Medium cutting/Fileable	24/600	UT/7 Fileable	No	0.83 mm	2 component
Dove tail saws
DOVE TAIL	PC-10-DTR	7311518263546	10	Dovetail right	10/250	UT/13	No	0.50 mm	Wood
DOVE TAIL	PC-10-DTL	7311518263553	10	Dovetail left	10/250	UT/13	No	0.50 mm	Wood
DOVE TAIL	PC-10-DTF	7311518263560	10	Dovetail flex	10/250	FT/15	No	0.50 mm	Wood
Special application saws
Laminate saw
LAMINATOR	PC-20-LAM	7311518258290	4	Laminate and wooden floors	20/500	XT/11	No	0.93 mm	2 component
Precision saw
PRECISION	PC-20-PRC	7311518264291	4	Mitre/Precision/Fine	20/500	UT/9	No	0.93 mm	2 component
Timber saw
TIMBER	PC-24-TIM	7311518263515	4	Coarse cutting/Fileable	24/600	FT/3.5 Fileable	No	0.93 mm	2 component
Plaster saw
PLASTER	PC-24-PLS	7311518263508	4	Plaster	24/600	GT/7	No	0.93 mm	2 component
General purpose saw
GEN. PURPOSE PC-15-GNP		7311518264307	4	General purpose	15/380	FT/15	No	0.75 mm	2 component
Polystyrene, foam saw
DECOR	PC-16-DECO	7311518264987	4	Polystyrene, foam saw	16/400	Special	No	0.75 mm	2 component
Concrete saws
	255	7311518007843	1	Concrete/Carbide tip	30/750	30 Carbide tips No		1.6 mm	2 component
	255-15/29	7311518007850	1	Concrete/Carbide tip	30/750	15 Carbide tips No		1.6 mm	2 component
Light Concrete saw
	256-26	7311518000080	4	Light weight concrete	26/650	Non-Carbide	No	1.15 mm	2 component

PrizeCut
GENERAL					BLADE				HANDLE
Type of	Art. code	EAN-	Pack	Application	Length	Toothing/TPI	Low friction	Thickness	Type
saw/material		code	Qty		in/mm		coating	of blade
UNIVERSAL	NP-22-U7/8-HP	7311518034399	10	Universal	22/550	UT/7	No	0.83 mm	1 component
UNIVERSAL	NP-19-U7/8-HP	7311518241452	10	Universal	19/475	UT/7	No	0.83 mm	1 component
UNIVERSAL	NP-16-U7/8-HP	7311518241773	4	Universal	16/400	UT/7	No	0.83 mm	1 component
Small saws
TENON	NP-12-TEN	7311518263959	10	Tenon saw	12/300	UT/13	No	0.75 mm	1 component
VENEER	NP-12-VEN	7311518264260	4	Veneer saw	12/300	UT/13	No	0.75 mm	1 component
COMPASS	NP-12-COM	7311518264277	4	Compass saw	12/300	UT/7	No	1.20 mm	1 component
General purpose saw
FINE	300-14-F15/16-HP	7311518005955	4	General purpose	14/360	FT/15	No	0.75 mm	1 component
Concrete saws
	NP-CONC	7311518264918	4	Concrete/Carbide tip	25/620	34 Carbide tips No		2.00 mm	Wood
	NP-CONC-17/34	7311518264925	4	Concrete/Carbide tip	25/620	17 Carbide tips No		2.00 mm	Wood

Image 7

Bahco Superior, PrizeCut manual ProfCut+ base assortment, ProfCut base assortment, Special application saws

PrizeCut, ProfCut, Superior specifications

Bahco is a renowned brand in the field of hand tools and cutting instruments, widely recognized for its exceptional quality and innovation. Among its impressive lineup of products, the Bahco Superior, ProfCut, and PrizeCut series stand out for their advanced features and technologies tailored to meet the diverse needs of professionals and DIY enthusiasts alike.

The Bahco Superior series epitomizes cutting-edge design and functionality. These tools are crafted using high-quality materials to ensure durability and longevity. One of the standout features of the Superior range is its use of ergonomic designs that provide optimal grip and comfort during prolonged use. This not only enhances user experience but also minimizes the risk of fatigue and injuries. The Superior line incorporates precision-ground blades that deliver clean and efficient cuts, making them ideal for applications in various industries such as construction, metalworking, and woodworking.

On the other hand, the ProfCut series is engineered for professional-grade performance. What sets ProfCut apart is its advanced blade technology, which includes specially formulated high-carbon steel. This construction provides superior hardness and sharpness, ensuring that the tools maintain their cutting edge for extended periods. The ProfCut tools also feature impressive corrosion resistance, enabling them to withstand harsh working environments. Furthermore, the series is designed for intuitive handling, featuring rubberized grips that enhance control and safety.

Lastly, the PrizeCut series is designed for those looking for affordable yet high-quality cutting solutions. The tools in this line combine practicality with performance, making them an excellent choice for both hobbyists and professionals. PrizeCut products utilize innovative manufacturing techniques that balance cost and quality, ensuring that users receive reliable tools without breaking the bank. Key characteristics of the PrizeCut series include lightweight designs for easy maneuverability and straightforward maintenance, allowing users to focus on their projects rather than tool upkeep.

In summary, Bahco's Superior, ProfCut, and PrizeCut series exemplify a commitment to excellence in tool manufacturing. Each series is tailored to cater to specific needs, whether it be ergonomic comfort, professional-grade performance, or budget-friendly reliability. With a legacy of innovation and quality, Bahco continues to be a trusted choice among those seeking high-performance cutting tools.