A S S E M B L I N G | 3 | |
| ||
|
|
|
Column and base
It is easiest to assemble the base and the speaker column if the loudspeaker is lying on a table.
In order to protect the table and the column from being scratched, we recommend that you place the wrapping foam on the table first.
The parts required for assembling the BeoLab
6000 are supplied with the loudspeakers:
1 Allen wrench
3 Screws (per speaker)
Hook the base plate onto the two guiding pins at the bottom of the speaker column (be care- ful not to drop the base plate!).
Insert the three screws and tighten them securely using the Allen wrench.
Placement
The BeoLab 6000 occupies very little space on the floor. In fact, it can be placed wherever it is most convenient for your room layout and for your preferred listening position.
Remember though, when planning where to place them, that all speakers in a setup need connection to a mains outlet and that they are designed to be left on at all times!
The BeoLab 6000 is designed for use in dry environments only!
