Banner American Products S18M Specifications, Dimensions

M-GAGE® S18M — Vehicle Detection Sensor

6 P/N 114430 rev. A

Banner Engineering Corp. • Minneapolis, MN U.S.A.

www.bannerengineering.com • Tel: 763.544.3164

P/N 114430 rev. A 7

M-GAGE® S18M — Vehicle Detection Sensor

Banner Engineering Corp. • Minneapolis, MN U.S.A.

www.bannerengineering.com • Tel: 763.544.3164

SpecificationsDimensions

��

Supply Voltage 10 to 30V dc (10% max. ripple) at 43 mA, exclusive of load

Above +50°C, supply voltage is 10 to 24V dc (10% max. ripple)

Sensing Range See Figures 5 and 6.

Sensing Technology Passive 3-axis magnetoresistive transducer

Supply Protection Circuitry Protected against reverse polarity and transient voltages

Output Configuration Two SPST solid-state outputs conduct when object is sensed; one NPN (current sinking) and one PNP (current

sourcing)

Output Protection Protected against short-circuit conditions

Output Ratings 10 mA maximum (each output)

NPN saturation: < 200 mV @ 10 mA and < 600 mV @100 mA; OFF-state leakage current: < 200 microamps

PNP saturation: < 1.2V @ 10 mA and < 1.6V @100 mA; OFF-state leakage current: < 5 microamps

Output Response Time 20 milliseconds

Delay at Power-Up 0.5 seconds

Temperature Effect < 0.5 milligauss/°C

Adjustments Configuration of Background Condition and Sensitivity Level may be set using the sensor’s push button or

remotely via the portable programming box (see page 5)

Indicators Two indicators (see Figure 4 and instructions on page 5):

Power Indicator (Green)

Configuration/Output Indicator (Red/Yellow)

Remote TEACH Input Impedance 12K ohms

Construction Threaded Barrel: Thermoplastic polyester Push Button Housing: ABS/PC

Push Button: Santoprene Lightpipes: Acrylic

Operating Conditions -40° to +70° C (-40° to +158° F); 100% max. rel. humidity

Connections 2 m or 9 m shielded 5-conductor (with drain) PVC jacketed attached cable or 5-pin Euro-style quick-disconnect

(see page 8 for quick-disconnect cable options)

Environmental rating Leak proof design is rated IEC IP67; NEMA 6P

Vibration and Mechanical

Shock

All models meet Mil. Std. 202F requirements method 201A (vibration: 10 to 60Hz max., double amplitude 0.06",

maximum acceleration 10G). Also meets IEC 947-5-2: 30G 11 ms duration, half sine wave.