MFCD 1218 User's Guide 15
Color MenuClock Menu
Function Description
OSD Position To display the OSD to your preferred
position.
Clock * To adjust the function only when
characteristics are blurred.
Clock Phase * To adjust ADC sampling clock phase.
Main Menu To return to Main Menu.
* Note: The Clock and Clock phase function
cannot function under S-Video input type.
Color Menu
- (Down) + (Up)
Auto Balance
Red 68
Green
65
Blue
70
Main Menu >
A1 1024 x 768 - 60.1 48.4k
Clock Menu
- (Down) + (Up)
OSD Position
Clock 1344
Clock Phase 4
Main Menu >
A1 1024 x 768 - 60.1 48.4k
Function Description
Auto Balance To automatically adjust the contrast
level of RGB. This does not support
resolution of Mac 832 x 624 at 75Hz.
RTo adjust the level of color Red.
GTo adjust the level of color Green.
BTo adjust the level of color Blue.
Main Menu To return to Main Menu.
Note: The color menu
cannot function under S-
Video input type. To perform the Autobalance function, you need
to select a proper test pattern before performing
the function.
Proceed as follows:
1 You must have installed the Barco DICOM
optimizer software.
2 Open the Windows Control Panel.
3 open the Display control panel.
4 Select the Barco DICOM optimizer tab.
5 Click on Test Patterns.
6 Select the Auto Adjust test pattern.
7 Now perform the function Autobalance from
the MFCD 1218 control panel.
8 When finished, click on Back to Optimizer
to close the test pattern.
9 Close the control panel.