9. Installation menu
5. Push the cursor key ↑or ↓to highlight Hbelow Barscale position.
6. Press ENTER to toggle between Left,Center and Right.
Toggleuntil the desired horizontal position is obtained.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu9-27
OSD configuration
Menu position
V Top
H Left
Barscale status Yes
Barscale position
V Top
H Right
Message status Yes
Back
Menu9-28
9.8.4 Message status
What can be done ?
Messagesgenerated bythe projector to inform theuser about e.g. shutdown, etc. can be disabled.
Enabling/disabling messages
1. Push the cursor key ↑or ↓to highlight OSD configuration. (menu 9-29)
2. Press ENTER to select.
The OSD configuration menu will be displayed. (menu 9-30)
3. Press ENTER to toggle between Ye s andNo.
Yes Them essages, when generate by the projectorwill be displayed.
No No messages will be displayed.
Installation
Input slots
File service
Internal pattern
When no signal
Source transition
OSD configuration
Language
V-Keystone
H-Keystone
Global keystone
Orientations
Back
Menu9-29
OSD configuration
Menu position
V Top
H Left
Barscale status Yes
Barscale position
V Top
H Right
Message status Yes
Back
Menu9-30
9.9 Language support
What is possible ?
The language of the OSD can be changed to some predefined languages.
The following languages are available:
• English
•German
• French
• Chinese
66 R5976763 CINEVERSUM 60/70 22042004