9. Service Mode
9. SERVICE MODE
9.1 Built-up
Built-up
The service menu is built-up in two parts which are connected together with the ’more’ item. If the desired item is not in the list of
thedisplayed menu, select ’more’ with the cursor key and push ENTER to display the other items in the service menu.
9.2 Start up
Start up
1. Push the cursor key ↑or ↓to highlight Service. (menu 9-1)
2. Press ENTER to display the service mode menu. (menu 9-2)
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu9-1
SERVICE
IDENTIFICATION
CHANGE PASSWORD
CHANGE LANGUAGE
CHANGE PROJ. ADDRESS
SERIAL COMMUNICATION
NETWORK
LAMP
DIMMING
MORE...
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu9-2
SERVICE
BARCO LOGO
ADD INS
PRESET INPUT BALANCE
ADVANCED PROCESSING
DIAGNOSIS
FACTORY DEFAULTS
MORE...
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu9-3
Some items in the Service mode are password protected (when the password function is active). Enter the
password to continue. All other passwordprotected itemsare n ow available if you stay in the adjustment
mode.
9.3 Identification
What can be seen on the identification screen?
The identification screen shows the general information of the projector.
The following items will be displayed:
• Typeof projector: SLM R9+
• Software version
• Network module: yes
• Proj. address: To change the address of the projector, see "Change Projector Address", page 105
• Installation:
- front/ceiling
- front/table
- rear/ceiling
- rear/table
• Baudrate: transferspeed for communication with an IBM PC (or compatible) or MAC. The baud rate of the projector must be
thesame as the baud rate of the connected computer. When there is a difference, consult ’Change Baudrate PC’ in this chapter.
• ProjectorRun Time: givesthe total run time since the first start up. Allprojectors leave the factory with a run time of approxi-
mately 24 hours.
• ProjectorSerial number: indicatesthe fabrication number of the projector. This number can be useful when calling for technical
assistance.
R5976801 SLMR9+ 20/10/2004 101