3. Installation Guide lines
3.5.1 Access to the Lamp Unit.
What has to be done
Toaccess the lamp casing, a side panel has to be removed.
Necessary tools
A flatblade screwdriverof 5 mm
Removingthesidepanel
1. Turn with a screwdriver the side panel lock screw a quarter turn counterclockwise. (image 3-8)
2. Pull the right side of the panel towards you and further to the right to remove. (image 3-9)
Image3-8
Unlockingthe side cover
Image3-9
Pulland remove the side cover
3.5.2 Installation of the new Lamp Unit.
What has to be done
Firstremove the lock nut on each spacer screwand next slide the lamp unit into the projecto rframe.
18 R5976801 SLM R9+ 20/10/2004