4. Connections
5. Press ENTER.
Theinternal system will scan the inputs and displays the result in the Input Slots menu.
6. Push the cursor key ↑or ↓to select the first or second slot. (menu4 -6)
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu4-4
INSTALLATION
INPUT SLOTS
800 PERIPHERAL
SOURCE SWITCHING
NO SIGNAL
CONTRAST ENHANCEMENT
CONVERGENCE
CONFIGURATION
LENS
QUICK ACCESS KEYS
OSD
INTERNAL PATTERNS
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu4-5
INPUT SLOTS
Slot Module type [config]
1. RGB-SS [CV]
2. RGB-SOG
3. SDI
4. SDI
______________
1. DVI OUTPUT [DVI input]
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu4-6
Possible indications on the input slot menu.
For the inputside:
• RGS-SS[CV or HS&VS] = RGB analog signals, separate sync is composite sync or horizontal and vertical sync.
• RGB-SS [CV] = RGB analog signals, separate sync is composite video.
• RGB-SOG[SOG or 3LSOG] = RGB analog signals, sync on green is composite sync or com positetri-level sync.
• COMPONENTVIDEO - SS [SS or3LSS] = separate sync is composite sync or composite tri-level sync.
• COMPONENTVIDEO - SOY [SOY or 3LSOY] = compo nent videowith c ompositesync on Y orcomposite tri-level sync on Y.
•VIDEO
•S-VIDEO
•DVI
Whenchanging from an analog signal on the 5 cable module to the PanelLink input the indication led on the front panel of the module
willswitch fro m the 5 cable inputto th eD VI(Pa nelLink) inputalso.
For the output on fixed slot 1:
• DVIinput : DVIin signal is looped through to the DVI out connector as it is.
• Activeimage : activeimagesignal, what ever the input is, is available in DVI on the DVI output signal (processing is incorporated
inthe signal). Setthe minimum delay in Installation >Advanced processing to OFF.
• DVIresync : DVIin signal is resyncronized with a stable clock and put on the DVI out connector
Whenusing an RCVDS 05 with a 5 ca bleo utput module, connect these 5 cables to this fixed 5-input slot (slot
1)of the projector. Allsources of the RCVDS can now be accepted by the projec tor.
4.5.5 Serial Digital Input (slot 3 & 4)
What can be connected to this input?
Thisinput is full compatibility with digital Betacam, or other digital video sources. Thisavoids the need for analog video processing
anywhere in the video production chain and guarantees the ultimate image quality.
Anactive loop-through of the SDI input signal is provided for monitoring or for double and or triple stacking applications.
How to connect ?
1. Connect the outpu t of your SDI source to the input BNC of the SDI input. (image 4-5)
Note: The input is always 75 Ωterminated.
2. If loop through is needed, usethe OUT to connect to the next device.
36 R5976801 SLMR9+ 20/10/2004