8. Installation Mode
3. Push the cursor key ↑or ↓to shift the image up or down and ←or →to shift the image left or right.
4. W hen finished, press EXIT to go to the lens adjustment menu or press ENTER to go to the zoom/focus function.
Pressthe selection key * to sw itch to another pattern. Different patterns are available.
Options
The zoom/focus and shift can be set the same for all files.
1. Push the cursor key ↑or ↓to highlight Options.
LENS ADJUSTMENT
ZOOM/FOCUS
SHIFT
OPTIONS
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu8-28
2. Press ENTER to select.
The Lens Options menu will be displayed.
LENS OPTIONS
Use the same
zoom and focus
of the lens
for all files?
[No]
<ENTER> to toggle
<EXIT> to return.
Menu8-29
3. Press ENTER to toggle between ’Yes’ or ’No’.
[Yes] alllens settings will be the same for all files
[No] different lens settings for all files
Default setting : [Yes]
When in the ’No’ position, the lens memory is using incremental motors which have an accuracy of 1 to 2
steps. This has no implication for zoom, but focus might demand some fine-tuning when switching from one
sourceto another.
8.10 Quick Access Keys
What can be done?
Itis possible to get an overview of the programmed functions of the different function keys (only accessible with an adap ted RCU).
R5976654 SLMR12+ 27/01/2005 105