B. Built-In Dust Filters
2. Brush most of the dust off with a soft brush and/or blow dust away with com presses air.
Tip: Always replace damaged and/or too dirty air filters by a new one.
How to reinstall the cleanedor new air filter
1. Place the air filters (A) on their place in the projector rear cover.
A
A
B
C
ImageB-18
Mountingthe fixation bar
2. Place themetal fixation bar (B) on its place, slide it to the left and secure by tightening the 3 socket screw s (C).
3. Place themetal fixation plate (D) on its place, slide it to the left and secure by tighten ing the 6 socket screws (E).
E
D
ImageB-19
Mountingthe fixation plate
4. Reinstall the rear cover onto the projector and secure by tu rning the captive screws (A) half a turn clockwise.
A
ImageB-20
Mountingthe projector rear cover
146 R5976654 SLM R12+ 27/01/2005