3. Installation Guidelines
Image3-19
MountedLens
Caution: On a table mounted projector,hold the projector when pushing the lens into the lens block to avoid sliding off from
the table.
3.7.5 Cleaning the lens
Tominimize the possibility of damaging the optical coating or scratching exposed lens su rface, we have de-
veloped recommendations for cleaning the lens. FIRST, we recommend you try to remove any material from
thelens by blowing itoff with clean, dry deionized air. DO NOT use any liquid to clean the lenses.
Necessary tools
Tora ys ee TM cloth (delivered together with the lens kit). Order number : R379058.
Howtocleanthelens?
Proceed as follow :
1. Always wipe lenses with a CLEAN TorayseeTM cloth.
2. Always wipe lenses in a single direction.
Warning: Do not wipe back and forwards across the lens surface as this tends to grind dirt into the coating.
3. Do not leave cleaning cloth in either an open room or lab coat pocket, as doing so can contaminate the cloth.
4. If smears occur when cleaning lenses, replace the cloth. Smears are the first indication of a dirty cloth.
WARNING:Do not use fabric softener when washing the cleaning cloth or softener sheets when drying the
cloth.
Dono t use liquid cleaners on the cloth as doing so will contaminate the cloth.
CAUTION:Otherlen ses can also be cleaned safely with this TorayseeTM cloth.
3.8 BatteryIns tallation int he RCU
How is the battery delivered ?
The battery for the RCU is not yet installed on delivery, to save the battery life time, and is placed in the upper compartment (B)
inside the RCU (image 3-20).
Howtoplugin!
1. Press the battery cover (A) lock (1) inwards and simultaneously lift up the cover (2) for removal.
R5976654 SLM R12+ 27/01/2005 25