3. Installation Guide lines
3.10 Rigging points and Accessories
Clamps
Slotsare made in the carry handle frame for easy inserting the overlockers and for easy adjusting the clamps position so that this
position matches with the rigging points.
Consulta professional structura l engineer prior to suspending the ceiling mount from a structure not intended for that use. Always
ensure the working load limit of the structure supporting the projector.
Image3-29
Mountingthe clamps
Image3-30
Mountingthe clamps
WARNING:Whenmounting the projector to th e ceiling or to a rigging system, always mount security chains.
How to mount the clamps?
Tofix the clamps to the U-profile, follow the next procedure :
1. Measure the distance, centertube as refer ence, between the two used support bars of a truss.
2. Slidethe clamps holders (2 per profile) on its place in the U-profile according the me asured distance and secure this position.
Image3-31
Mountingthe clamp — detail
3. Turn the overlockers in the holes of the clamp holder.
The overlocker can turn around.
How to mount the Overlockers to the truss?
Tomount the overlocker to the truss, handle as follow :
1. Open the fixation handle.
30 R5976654 SLM R12+ 27/01/2005