6. Start up of the Adjustment mode
6.STARTUPOFTHEADJUSTMENTMODE
6.1 Start up
Possible paths
There are 3 possible pathsto fo llow once inthe Adjustment mode. Theyare :
• Installation- Installation should be selected if a new input module is installed or a new source is connected to an e xistinginput
module. Also when the projector is relocated in a new configuration.
• RandomA ccess- R andom Access shouldbe selected to set up a new source.
• Service- Service should be selected if the user intends to change general settings such as password, language, address, etc.or
some service actions or get set-up information.
How to start up.
1. Press ADJUST or ENTER to enter the Adjustment mode.
The adjustment mode opens.
ADJUSTMENT MODE
Select a path from below :
RANDOM ACCESS
INSTALLATION
SERVICE
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu6-1
2. Th e cursor key (RCU) or ’+ or ’-’ keys (local keypad) are used to make menu selections and also for adjustments.
3. The ENTER and EXIT keys are usedto move forward and backward through the menu structure.
4. Th e ADJUST key can be used to terminate the adjustment mode whileany path se lectionmenu is displayed.
6.2 Password
Password protection of some items.
Someitems in the Adjustment mode are password protected. Whileselectingsuch an item, the projector asks to enter your password
(Passwordprotection is only available when the password strap on the controller module is ON, call an authorized service center to
change the position of the password strap).
Entering your password
1. The first digit position is highlighted. Enter the first digit.
PASSWORD
ENTER PASSWORD
----
Use numeric keys
<EXIT> to return
Menu6-2
The highlighted square jumps to the next position.
2. Continue with the other digits
Example:2319
R5976654 SLMR12+ 27/01/2005 59