7. Random Access Adjustment Mode
Projector Maximum color space
EBU EuropeanBroadcasting Union. Thisorganization defines a Euro pean standard.
SMPTE American standard
Custom Theuse can define the x and y coordinates for red, green and blue which forms the corners of the color
space. By changing the coordinates, the color reproduction can be changed.
3. When custo m isselecte d,a bar scale for Red x appears. Adjustwith the left and right arrow key. Press ENTER to switch to the
nextadjustment. Theadjustment order is Red x →Redy→Green x →Green y →Blue x →Blue y. When finished, press EXIT
to return.
When returning to a predefined color space, the custom values will be overwritten.
7.3.5 Noise Reduction
Purpose
Reduces noise and pixel jitter in all video and data sources
Changing the noise reduction value.
1. Push the cursor key ↑or ↓to highlight Noise Reduction.
PICTURE TUNING
COLOR TEMPERATURE
GAMMA
COLOR SPACE
NOISE REDUCTION
INPUT BALANCE
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu7-32
2. Press ENTER to select.
3. Change the v alue by pushing the cursor key ←or →until the desired noise level is reached.
4. Press EXIT to return the Picture Tuning menu.
7.3.6 Input Balance
Why adjusting the input balance?
Theinput balance is normally correct adjusted in the factory. Butdue to signal distribution or signal transmission, a color imbalance
canbe the result. Thisimbalance can be adjusted source by source for color critical applications. These adjustments influence only
the actual custom adjustment file. This procedure is not so easy.
Thereare 2 different adjustment procedures, one for R GB (included Video and S-Video) and one for YUV input
signals.
Beforestarting the InputBalance function, generate a signal with dominant black and white areas.
R5976654 SLMR 12+ 27/01/2005 75