7. Random Access Adjustment Mode
B Verticalsize adjustment
Size adjustment
1. Push the cursor key ↑or ↓to highlight Size.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
OPTIONS
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu7-42
2. Press ENTER to select.
3. Push the cursor key ↑or ↓to size the image ina vertical direction.
Pushthe cursor key←or →to size theimage in a ho rizontaldire ction.
While the bar scale window is on the screen, press ENTER to change the value indication to an input field.
Enterthe desired value with the nu meric keys on the RCU. Always 3 digits should be entered. To toggle + to -
or vice versa, use the up or down arrow key.
7.4.5 Side Keystone
What can be done?
Theside keystone adjustment is used to align the image if the projector is mounted at a non standard projection angle.
Image7-6
SideKeystone
Side keystone adjustment
1. Push the cursor key ↑or ↓to highlight Side Keystone.
GEOMETRY
SHIFT
SIZE
SIDE KEYSTONE
BLANKING
ASPECT RATIO [4:3]
OPTIONS
Select with ↑or ↓
then <ENTER>
<EXIT> to return
Menu7-43
2. Press ENTER to select.
3. Push the cursor key ←or →to adjust the keystone of the image.
Whenthe upper part of the image is wider than the lower part of the image, push the cursor key ←. Thenumber indication below
the bar scale will be negative.
When the upper part of the image is smaller than the lower part of the image, push the cursor key →. The number indication
below the bar scale will be positive.
R5976654 SLM R12+ 27/01/2005 81