3.Remove outer and inner control panel covers. Install the 3 pin accessory plug from the parts bag into the control panel if not already equipped. See figure 6A for side installation the 5 or 6 ton cabinet size. See figure 6B for back installation on the 2 and 3 ton cabinet size.

4.Plug the WUVCLP light into the 3 pin accessory plug just installed. Plug located on the side or back of the control panel. Secure mounting bracket to control panel with screws provided.

5.Route the flexible conduit from the light across the blower partition and into the transformer box. Secure the conduit to the box with the fitting supplied. (See Figure 9)

Figure 9

6.Remove the nut securing the transformer foot to the box and connect the ground wire to this bolt. Reinstall the nut. Connect the black wire from the UV light to one of the black transformer secondary wires with the wire nut provided. Connect the red wire from the UV light to the other transformer secondary wire with the wire nut provided.

7.Place the transformer protective shield over top of the transformer and wires and fasten into place. (See Figure 8)

8.Remove 2 screws holding the back of the blower partition to the drain pan. Install two metal conduit clips supplied to hold the flexible conduit in place along the back of the control panel. Reinstall the screws. (See Figure 9) Caution: Do not leave wires exposed to the UV light or the insulation will decay thus causing an electrical hazard.

Page 9

Page 9
Image 9
Bard WUVCLP-A, WUVCLP-C installation instructions

WUVCLP-A, WUVCLP-C specifications

Bard WUVCLP-C and WUVCLP-A are advanced catheter systems designed for use in healthcare settings that require high levels of efficiency and safety in venous access. These devices are particularly beneficial in critical care environments and for patients requiring long-term venous access.

One of the standout features of the WUVCLP series is its unique catheter design, which incorporates advanced materials that enhance biocompatibility. These materials minimize the risk of adverse reactions and reduce the potential for catheter-related complications. The catheters are engineered to be flexible yet strong, which aids in maneuverability and positioning within the vascular system.

The WUVCLP-C model is designed specifically for central venous access. Its dual-lumen configuration allows for the simultaneous administration of medications and fluids, which can be especially important in emergency situations where time is of the essence. This model is equipped with mechanisms to reduce the likelihood of thrombus formation, which is a prevalent issue in central venous catheters.

On the other hand, the WUVCLP-A model is optimized for arterial access. This model significantly enhances flow rates and is particularly advantageous in procedures that require precise monitoring of blood pressure or the administration of medications directly into the arterial system. Both models include features that promote ease of insertion and minimize the trauma associated with venous access.

Both WUVCLP-C and WUVCLP-A utilize advanced technologies such as ultrasound guidance for improved accuracy during placement. This helps healthcare providers achieve optimal outcomes, particularly in challenging anatomy or in patients with difficult venous access.

Furthermore, these systems are designed with patient safety in mind. They incorporate secure locking mechanisms and are compatible with other medical monitoring devices, ensuring that they meet the rigorous demands of critical care environments.

Additionally, the Bard WUVCLP series benefits from ongoing clinical insights, allowing healthcare providers to utilize the latest evidence-based practices for patient care.

In summary, Bard WUVCLP-C and WUVCLP-A catheters represent a significant advancement in vascular access technology, featuring innovative designs and materials that prioritize patient safety and clinical effectiveness. Their dual capabilities for central and arterial access make them indispensable tools for modern medical practice.