o With the control panel removed, refit the oven and gas thermostat control knobs. Ignite each burner separately and set the control knob to the minimum position.
o Using a suitable screwdriver, turn the screw clockwise to decrease the flow of gas and make the flame smaller. Turn the screw
o To establish the correct adjustment, the flame should be approximately 3 - 4 mm in length. For Butane / Propane gas, the adjusting screw must be tightly screwed in.
oTurn the control knob to maximum and then back to minimum two or three times to make sure that the flame does not go out when the control knob is set to minimum.
oIf the flame does go out, repeat the procedure again.
oRemove the control knobs for the oven and grill and refit the control panel and hob top taking care to ensure they are fitted correctly.
oReplace all the control knobs.
oYour cooker should now be adjusted correctly to work on LPG gas.
37
