Connecting to the mains water supply
IMPORTANT: Do not connect the appliance to your mains water supply using an old or an existing water inlet hose. The inlet hose supplied with the dishwasher is the ONLY one that should be used.
DO NOT CONNECT THE WATER INLET HOSE TO A HOT WATER TAP.
oThe inlet hose will be located inside the cabinet of the dishwasher.
o Connect the water inlet hose to a threaded water tap that has a 3/4” thread and to the inlet hose connector on the appliance.
oFully tighten the inlet hose to the water tap and the dishwasher.
IMPORTANT: The inlet hose is fitted with an aqua stop. This MUST be fitted in the upright position, as shown in the above diagram.
Connecting to the water outlet
oSecure the drain hose as outlined above (A or B) so that it cannot move whilst the dishwasher is in use.
oPlace the end of the drain hose in your drain pipe and push it a short way down.
36
