The Harbormaster Telescope
First attach the legs to base using 3 leg bolts 26 and
3 leg nuts 5. Then line up parts 11, 22, 17, and 8 as
shown.
Set cradle on top of base, and thread bolt into
cradle. Bolt 11 should be secured tight. A 1/2 inch
socket wrench is needed for this operation. A drop
of adhesive on the thread of the screw 11 will
prevent loosening.
Set cradle in horizontal position and lock. Set
telescope in cradle with the threaded holes up and
insert cradle screws 25. A drop of oil will assure
smooth motion of the Telescope during use. Vertical
motion movement is controlled by slightly loosening
or tightening the lock nuts.
Congratulations on becoming the owner of the
Bausch & Lomb HARBO RMASTER Te l e s c o p e .
Following a few simple precautions for care
will aid in the preservation of this fine
instrument.
CLEANING AND CARE OF THE BRASS
Do not use polish or use abrasives on the brass parts.
Simply wipe the moistened cloth and dry.
TRIPOD
The wooden legs can be waxed with furniture wax
or polish with same care given to furniture.
LENSES
If ever necessary to clean, wipe using only a water-
dampened soft cloth, free of abrasives of
commercial cleaners that could scratch or etch the
glass.

TELESCOPE LIFETIME LIMITED WARRANTY

Your telescope is warranted to be free of defects in materials and workmanship
for the lifetime of the original owner. The Lifetime Limited Warranty is an
expression of our confidence in the materials and mechanical workmanship of
our products and is your assurance of a lifetime of dependable service.
If your telescope contains electrical components the electronic components are
warranted to be free of defects in materials and workmanship for one year
after the date of purchase.
In the event of a defect under this warranty, we will, at our option, repair or replace
the product, provided that you return the product postage prepaid. This warranty
does not cover damages caused by misuse or improper handling, installation or
maintenance of the product.
Any return made under this warranty
must be accompanied by the items listed below:
1) A check in the amount of $15.00 to cover the cost of handling
2) Name and address for product return
3) An explanation of the defect
4) Product should be well packed in a sturdy outside shipping carton
to prevent damage in transit and return postage prepaid to the
address listed below:
IN U.S.A. Send To:
Bushnell Performance Optics
8500 Marshall Drive
Lenexa, Kansas 66214
For products purchased outside the United States and Canada please contact
your local dealer for applicable warranty information. This warranty gives you
specific legal rights. You may have other rights which vary from country
to country.
©2001 Bushnell Performance Optics
IN CANADA Send To:
Bushnell Performance Optics
25A East Pearce Street, Unit 1
Richmond Hill, Ontario L4B 2M9

WARRANTY/REPAIR

The HARBORMASTER Telescope is packed in four
groups:
1. Telescope
2. Cradle
3. Base
4. legs
In addition, you will find the connecting hardware:
2 cradle screws (25)
3 leg bolts (26)
3 leg nuts (5)
1 center bolt (11)
1 washer (22)
1 spring (17)
1 spacer (8)