Pump/Low

Sensor Fault

Pressure Neon

Neons

 

Air Flow

Monitor Neon

30o 40o 50o 60o 70o 80o

Fig. 12

Reset

Fig. 13

Reset

Fig. 14

3.0Operating the Boiler

3.5Air Flow Monitor

1.The boiler is fitted with an air pressure sensing device. This monitors the flue system.

2.If the neon illuminates ( ) it indicates that the flue or flue terminal is blocked or obstructed in some way,

or that there is an internal fault. If there is no external blockage of the flue terminal that can be easily removed contact your Installer or Service Engineer (Fig. 12).

3.6Pump Fault or Low Pressure

1.The neon ( ) will illuminate if the circulating pump is faulty or the system pressure drops below the

minimum requirement (Fig. 12).

2.Check the pressure gauge as described in Section 3.9. If the pressure is in the normal range, a pump fault is indicated. Contact your Installer or Service Engineer to determine the nature of the fault.

3.7Sensor Fault

1.When the ( ) or ( ) neon is illuminated a fault on the hot water or central heating temperature sensor

is indicated (Fig. 12). Contact your Installer or Service Engineer.

3.8Pump Protection

1.With the selector switch in either Position (i) or Position (ii) (Figs. 13 & 14) the pump will automatically operate for 1 minute in every 24 hours to prevent sticking.

8© Baxi Heating UK Ltd 2007

Page 8
Image 8
Baxi Potterton 105 HE operating instructions Air Flow Monitor, Pump Fault or Low Pressure, Sensor Fault, Pump Protection

105 HE specifications

The Baxi Potterton 105 HE is a popular choice for homeowners seeking an efficient and reliable heating solution. Known for its innovative technology and user-friendly features, this boiler is designed to meet the demands of any household while ensuring comfort and energy efficiency.

One of the standout features of the Baxi Potterton 105 HE is its impressive energy efficiency rating. With a high Seasonal Efficiency of Heating (SEDBUK) rating, it can significantly reduce energy bills by maximizing heat output while minimizing fuel consumption. This is particularly important for environmentally conscious consumers looking to decrease their carbon footprint.

The boiler employs a compact design, making it suitable for various installation scenarios, including tight spaces. Weighing relatively light and equipped with rear flue option, it facilitates easier placement in kitchens, utility rooms, or lofts without requiring significant alterations to existing layouts.

The Baxi Potterton 105 HE boasts a reliable and user-friendly digital display, allowing users to monitor their heating system effortlessly. It features a built-in time clock that can be programmed for heating schedules, providing flexibility and ensuring warmth when needed most. Additionally, a wide range of system control options is available, enabling integration with smart thermostats for even greater control over home heating.

This boiler is equipped with a modulating burner, which adjusts the heat output based on the heating demand. This technology enhances comfort by maintaining consistent temperatures and reducing the risk of overheating or underheating rooms. It further supports efficiency by using only the necessary amount of fuel during operation.

Maintenance is simplified with the Baxi Potterton 105 HE, which is designed with easy access points for servicing. The inclusion of fewer components in its construction helps minimize the likelihood of mechanical failures, promoting reliability and longevity.

Safety features are also paramount in the design of the Baxi Potterton 105 HE. It incorporates advanced diagnostics and safety cut-offs to protect both the appliance and the household from potential hazards.

Overall, the Baxi Potterton 105 HE combines energy efficiency, modern technology, and practical design to deliver a top-tier heating solution for today's homes. Its well-rounded features make it a wise investment for anyone looking to enhance their home comfort while remaining mindful of energy consumption.