User Operating Guide

and Serial Number

Optional

Integral Timer

Facia Cover

1.0Operating the Boiler

1.1Operating the Boiler

1.Hinge down the facia cover (Fig. 1).

2.Turn on the main gas and electricity supplies to the

boiler. The Mains On light () will illuminate green (Figs. 1 & 2).

3.Set the central heating control knob to the required setting (Fig. 1). (The optimum boiler setting depends upon type of system, external controls and your requirements. Your installer will be able to advise you on this matter.)

4.When the system control(s) call for heat the fan will start to run and after a short period the ignition spark will commence. Sparking will continue until the flame is established then stop automatically. Check that both the

Mains ON light () and Boiler ON light ( ) are illuminated green (Figs. 1 & 2).

5.The boiler can be switched off by turning all external controls or the optional integral timer Heating and Hot Water settings to OFF.

1.2To shut down the Boiler

1.Turn off the electricity supply to the boiler at the system isolation switch and turn off all external controls.

2.Your installer should have demonstrated how to shut down the boiler - if not he will be able to advise you.

Low

HighReset

1.3

Frost Protection

1. The boiler has integral frost protection. It is

recommended that the installer fits a suitable device to

also protect the system if required. The boiler must be

turned ON at the system isolation switch for frost

protection.

Fig. 1

 

 

 

 

Central Heating

Low

 

 

 

Control Knob

High

 

 

 

(No OFF Position)

 

 

 

 

Reset Button

 

 

 

 

 

 

 

 

 

 

Reset

 

 

 

 

Mains On

 

 

 

 

 

 

 

 

(Green Light)

 

 

 

 

Burner On

 

 

 

 

(Green Light)

 

 

 

 

Flame Failure

 

 

 

 

(Red Light)

Fig. 2 Key to Controls

Turn the Central Heating Control Knob clockwise to increase or anticlockwise to decrease the boiler flow temperature.

The Reset Button should extingush the Flame Failure Light and restore normal operation.

This indicates that there is electricity to the Boiler.

This indicates that the Burner has fired up and is heating your system.

If Flame Failure Light is ON press the Reset Button. If Flame Failure occurs persistently consult your Installer or Service Engineer.

1.4

In Operation

1.The Promax FSB 30 HE is a high efficiency “condensing boiler”. In common with other condensing boilers its exceptional efficiency means the flue gases are cooled to such an extent that a plume of water vapour is often visible at the outside flue terminal. The amount produced depends on system design, product use and outside air temperature but it is not harmful to the individual or the working of the boiler in any way.

2.The boiler incorporates a condensate pump which may operate at any time, for up to 30 seconds, even when the boiler is not running.

1.5In the Event of a Gas Leak

1.If a gas leak occurs or is suspected, turn off the gas supply at the meter control.

2.Do not operate electric light or power switches, either off or on and ventilate the property.

© Baxi Heating UK Limited 2008

3. Contact your gas supplier.

3

 

 

Page 3
Image 3
Baxi Potterton FSB 30 HE warranty Operating the Boiler, Low HighReset

FSB 30 HE specifications

The Baxi Potterton FSB 30 HE is a highly efficient and reliable heating solution designed to meet the demands of modern residential and commercial applications. Known for its robust performance and energy-saving capabilities, the FSB 30 HE is a popular choice among homeowners seeking effective heating solutions.

This boiler is a wall-mounted appliance that boasts a compact design, making it suitable for installations in various locations, including kitchens and utility rooms where space is limited. One of the standout features of the Baxi Potterton FSB 30 HE is its high-efficiency rating, which allows it to convert a substantial portion of its fuel into usable heat. This efficiency not only translates into lower energy bills but also contributes to reduced carbon emissions, aligning with today’s eco-friendly standards.

Equipped with advanced technologies, the FSB 30 HE incorporates a highly efficient heat exchanger that maximizes heat transfer while minimizing energy loss. Additionally, the boiler is designed with an easy-to-read digital display, providing users with clear information on operating settings and system performance, ensuring a user-friendly experience.

The FSB 30 HE also features a built-in frost protection system that ensures the boiler operates efficiently even in colder temperatures. This function prevents the system from freezing during winter months, providing peace of mind to homeowners.

Another notable characteristic is the boiler’s low noise operation. Many users appreciate how quietly the FSB 30 HE runs, making it an ideal choice for homes where noise levels need to be kept to a minimum. Maintenance is also made straightforward, thanks to the boiler’s thoughtful design that allows easy access to key components. This accessibility simplifies servicing and reduces the time and cost involved in routine maintenance.

In terms of control options, the FSB 30 HE is compatible with a range of smart heating controls, allowing users to automate and customize their heating schedules conveniently. Homeowners can enjoy enhanced comfort and increased control over their heating system.

In summary, the Baxi Potterton FSB 30 HE is an innovative and efficient boiler solution that combines modern technologies, user-friendly features, and compact design. Its reliable performance and energy-saving capabilities make it a desirable choice for anyone looking to improve their home heating system.