Baxi Potterton Solar MenuInfo, States are shown, Message OK? confirm with = no or, Resetpossible

		3.0	Commissioning of solar controller
		3.1.5 Menu“Info”
		In this menu mode all measured values and operating
		states are shown.
		If the values are marked as “resettable”, they may be
		reset in the following way:
		Choose the value with buttons		and
		Reset value by means of the button
		Message “OK?” confirm with		= no or	= yes
Indication	Description			Resetpossible
75ºC	Indication of current collector temperature				no
min. 12ºC	Indication of minimum collector temperature				yes
	Re-settable to current temperature
max. 105ºC	Indication of maximum collector temperature				yes
	Re-settable to current temperature
52ºC	Indication of current temperature storage tank (lower)				no
min. 40ºC	Indication of minimum temperature storage tank (lower)				yes
	Re-settable to current temperature
max. 67ºC	Indication of maximum temperature storage tank (lower)				yes
	Re-settable to current temperature
25ºC	Indication of universal temperature measuring points (T3)				no
55ºC	Indication of current temperature storage tank thermostat				no
60ºC	Indication of current temperature collector return				no
60ºC	Heating, cooling, temperature differential controller				no
	heat source. Sensor T1...T6
35ºC	Temperature differential controller				no
	heat target
1234 h	Operating hours for charging storage tank				Yes
	Resettable to 0 h
927 kWh	Energy productivity for storage tank				Yes
	Resettable to 0 kWh

12 Potterton Solar - Solar Thermal Domestic Hot Water System