BEA Door Switch And Toggle Switch specifications Doorswitch, Description / Specifications, Common

1 Description / Specifications

FACE PLATE (DOUBLE SIDED TAPE MOUNTED TO PLATE)

SELF-DRILLING MOUNTING SCREWS (2)

TOGGLE SWITCH

(WIRING HARNESS NOT SHOWN)

DOORSWITCH

USER’S GUIDE

TOGGLE SWITCH

DESCRIPTION	SPECIFICATION
DIMENSIONS	2.50” (64mm) L
	1.50” (38mm) H
	1.75” (44mm) D
MATERIAL	Anodized Aluminum
SWITCH RATING	10A 125VAC
	6A 250VAC
	On-Off-On

2Precautions

‰Shut off all power in access control circuit before attempting any wiring procedures.

‰Maintain a clean & safe environment when working in public areas.

‰Constantly be aware of pedestrian traffic around the door area.

‰Always stop pedestrian traffic through the doorway when performing tests that may result in unexpected reactions by the door.

‰ESD electrostatic discharge: Circuit boards are vulnerable to damage by electrostatic discharge. Before handling any board ensure you dissipate your body’s charge.

‰Always check placement of all wiring before powering up to insure that moving door parts will not catch any wires and cause damage to equipment.

‰Ensure compliance with all applicable safety standards (i.e. ANSI A156.10/19) upon completion of installation.

‰DO NOT attempt any internal repair of the Piezo Button. All repairs and/or component replacements must be performed by BEA, Inc. Unauthorized disassembly or repair:

1.May jeopardize personal safety and may expose one to the risk of electrical shock.

2.May adversely affect the safe and reliable performance of the product will result in a voided product warranty.

3 Installation

20.5078 HOLD SWITCH

NOTE: Cut-off connector ONLY if wiring directly to operator.

DOOR SWITCH

DOOR CONTROL

ON	1a	RED	COMMON
		BLACK
OFF	1		ACTIVATION
		WHITE
HOLD	1b		SAFETY
OPEN

1.	The Doorswitch is designed to be a plug-and-go connection to the LO-Llinx modules.	ACTIVATING
		DEVICES
2.	If the Doorswitch is to be wired to a door that is NOT using the LO-Linx module,
	cut off the connector, strip the wires and wire as shown above.

4 Company Contact

Do not leave problems unresolved. If a satisfactory solution cannot be achieved after troubleshooting a problem, please call BEA, Inc. If you must wait for the following workday to call BEA, leave the door inoperable until satisfactory repairs can be made. Never sacrifice the safe operation of the automatic door or gate for an incomplete solution.

The following numbers can be called 24 hours a day, 7 days a week. For more information, visit www.beasensors.com.

US and Canada: 1-866-249-7937	Southeast: 1-800-407-4545
Canada: 1-866-836-1863	Midwest:	1-888-308-8843
Northeast: 1-866-836-1863	West:	1-888-419-2564
75.5189.01 20071101		Page 1 of 1