WIRING SYSTEM CHANGES
Beckett burners have taken advantage of the changes in the R7184 controls to improve the wiring system. Component and power cord wires, now
CHANGING COMPONENTS — When changing components, the type of connection that you need to make depends on the way the components (motor, valve, igniter), power cord and control are terminated. Where all the leads / connections are the same, no modifications are required. Where the two ends of a connection are dissimilar, see the options in the following table:
If your components are |
| You should use the following: |
| |
terminated like this: |
|
| ||
|
|
| ||
|
|
|
|
|
Components | Control |
| Connection options |
|
|
|
|
|
|
Stripped end | Wire leads | • | Wire nuts |
|
|
|
|
|
|
Flag terminal | Spade | • | QC (Quick Connect) |
|
|
|
|
|
|
Flag Terminal | Wire leads | • | Cut flag terminal and strip |
|
|
| |||
|
|
|
| |
|
|
|
|
|
|
| • | Add flag terminal to component |
|
|
|
| lead– QC |
|
Stripped end | Spade | • | Cut existing component lead |
|
|
|
| ||
|
|
| in. from flag terminal and strip |
|
|
|
|
| |
|
|
|
| Reduced number of leads in wiring box. |
|
|
|
|
Fig. 1 – Cutting lead from component to be | Fig. 2 – Using jumper to connect to new |
replaced to use as jumper | component with stripped leads |
Beckett Service Kits for termination conversion:
If you have any questions regarding controls or the Beckett R7184 primary control by Honeywell, please contact R.W. Beckett at
R.W. Beckett Corporation • P. O. Box 1289 • Elyria, Ohio 44036 • (800)
R.W. Beckett Canada Ltd. • Unit 3 - 430 Laird Road • Guelph, Ontario, Canada N1G 3X7 • (800)
RWB 664857R0404 | Printed in U.S.A. |