Beckett specifications ~~edett, ModelSM, Beckett, Flame, Heads, Specifications, Corporation

~~edett

The adaptable, efficient Model 8M burner is not dependent upon a combustion chamber for flame stabilization. Instead, it's avail- able with a choice of six flame-retention heads that lock a highly stable, fuel-efficient flame in place forreliable combustion. These one-piece, stainless steel heads are a pri- mary reason why the Model 8M can provide fuel savings of up to 35%! All heads fit a standard 4-inch diameter air tube and are easily installed for optimizing performance in a variety of applications.

~The specially designed burner housing en- hances operating efficiency while it mini- mizes air noise. This sturdy housing and

rugged motor and controls give the Model 8M the durabilityand dependabilitydemanded by today's tough burner applications.

Flame-

Retenti.on FO 0.50 - 0.85 gph

Heads

ModelSM

OIL BURNER

Specifications

Capacities-Model 8M

0.50to 3.00 gallons per hour 70,000 to 420,000 BTU/hr input

Fuels

No.1 or No.2 heating oil (ASTM D396) only

Dimensions (standard)

Height:	13-1/2"
Width:	14-114"
Depth:	8-1/2" (chassis only)
Electrical	Characteristics
Motor:		3450 rpm, NEMA M-flange,
		manual reset overload protection
Power Supply:		120 V.l60 Hz.ll phase
Ignition:		10,000 V.l23 ma. secondary,
		continuous duty shielded
		transformer
Operating Load:		5.8 amps (maximum)
Alternate Voltages
or Frequency:		Consult Customer Service
Fuel Unit

Single stage or two stage

~	R.W.	BECKETT		CORPORATION
	U.S.A.:	P.O. Box 1289	oElyria, Ohio 44036' 800-645.2876'		(440)	327-1060'	FAX (440)	327-1064
Canada:	R.W. Beckett	Canada, Ltd.'	Unit 3.430 Laird Road'	Guelph,	Ontario,	N1G 3X7'	800-665-6972'	FAX (519) 763-5656